This guide focuses on G HUB problems when the application becomes unresponsive during startup, displaying a continuously spinning logo.
On Windows
G HUB uses a service to perform important operations. Sometimes, that service can get stuck and as a result G HUB presents a spinning G Logo.
Step 1: Close G HUB completely
- Right-click the G HUB icon in your system tray (bottom-right corner of screen)
- Select "Quit" from the menu
- Verify closure: Ensure the G HUB window is completely closed
Step 2: Access the Task Manager
- Press Ctrl + Alt + Del and select "Task Manager"
- Alternative: Press Ctrl + Shift + Esc for direct access
- If you see a simplified view, click "More details" at the bottom
Step 3: End G HUB Processes
- Click the "Processes" tab
- Look for these processes and end them in this order:
- "LGHUB Agent" → Right-click → "End task"
- "LGHUB" → Right-click → "End task" (all of them)
- Note: Leave "LGHUB Updater" running
Step 4: Restart G HUB Service
- Click the "Services" tab in Task Manager
- Locate "LGHUBUpdaterService"
- Right-click → Select "Restart"
- Wait 10-15 seconds until the Status shows "Running"
Step 5: Launch G HUB
Open G HUB through:
- Start Menu → Search "G HUB"
- Desktop shortcut (if available)
- System tray (if icon reappears)
If the Issue Persists
Option 1: System Reboot
A full computer restart often resolves service issues.
Option 2: Advanced Troubleshooting
If you're using an administrator account and the problem continues, refer to our G HUB Advanced Troubleshooting guide.
On macOS
Step 1: Close G HUB Completely
- Right-click the G HUB icon in your menu bar (top-right corner of screen)
- Select "Quit G HUB" from the dropdown menu
- Alternative: Press Cmd + Q while G HUB is active
- Verify closure: Ensure all G HUB windows are completely closed
Step 2: Access Activity Monitor
- Press Cmd + Space to open Spotlight, then type "Activity Monitor"
- Alternative: Applications → Utilities → Activity Monitor
Step 3: End G HUB Processes
- In Activity Monitor, click the "CPU" tab
- Use the search box (top-right) to filter by "G HUB"
- Look for these processes and quit them in this order:
- "Logitech G HUB Agent" → Select → Click "Force Quit" (X button)
- "Logitech G HUB" → Select → Click "Force Quit" (X button)
Step 4: Restart G HUB Service
Since macOS handles services differently, we'll restart through the system:
- Open Terminal: Press Cmd + Space, type "Terminal", press Enter
- Kill remaining processes (if any): sudo pkill -f lghub
- Enter your password when prompted
- Wait 10-15 seconds for processes to fully terminate
Step 5: Launch G HUB
Open G HUB through:
-
- Applications folder → Logitech G HUB
- Spotlight Search: Press Cmd + Space → Type "G HUB"
- Launchpad → Look for G HUB icon
If the Issue Persists
Option 1: System Restart
A full Mac restart often resolves service issues and clears system caches.
Option 2: Advanced Troubleshooting
If you have administrator privileges and the problem continues, refer to our Advanced Troubleshooting guide.
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section
There are no Downloads for this Product
There are no Downloads for this Version
Compatible Product
