Introducing Options+: Upgrade your experience with the next-generation Logitech app for mice & keyboards
Pinned Featured
Logitech Options+ app, available today in an open beta for Windows 10, macOS 10.15 and 11 , is designed to help you create and communicate more efficiently than ever using Logitech's mice and keyboards. With Options+ you can work at your best, no matter the task or the app, and be at your most productive by customizing every aspect of your devices to suit your needs, workflows, and preferences.
https://www.youtube.com/watch?v=s5POJvwK8nc
The app combines the best of the current Options software with a newly redesigned, intuitive interface, that helps maximize your productivity in a next-generation, free-to-use, app.
Learn more here.
We invite you to join the beta for Options+ here with your supported Logitech device, and share your feedback using the button provided in the app. Your input is very important during the beta phase, allowing us to continually make improvements and deliver the best experience possible. We look forward to hearing from you!
Thanks,
Options+ team
-
Hey Rozi,
We are sorry to know that. As informed earlier, for any issues/bug reports with Logitech Options+, please refer to the Feedback tab at the bottom of the app or you can send an email to us on logioptionsplus@logitech.com, your feedback will be directly received by the engineering team and they will look into it.
Regards,
Prem L
Logi Support -
Hey Nilton,
Thanks for adding your voice again in this thread. As the Logi Options+ is in the early phase of development, we may expect some uncomfortable situations. However, with your feedback, the team will work on the issue that our customers reported and release new versions with fixes. Hope you already shared the same feedback in the email.
Regards,
Prem L
Logi Support -
Hi,
I recently bought a new Mouse lift vertical.
so i trying to install logo options plus to custom buttons.
through logitech opicial website i download install file and run it.
but few seconds later it says "the internet connection isn't linked, Cannot download logi options plus. try it later ".
so i tryed several times but it doesnt go further.....
how can i use logi options plus??
thanks
-
Hi Jason,
Thank you for reaching out. We apologize for the delay in response. We request you to try the steps below and check if this helps your resolve the issue:
1. Uninstall all the Logitech software
2. If you are using windows clean boot the system by following the steps below:
https://support.logi.com/hc/articles/360023183914
3. Install Logitech Option+ software from the link below:
https://support.logi.com/hc/articles/4418699283607-Logi-Options-Beta
Regards,
Sha
Logi Support -
I'm using Logi Options+ version 0.92.6405 on two linked machines. I have an MX Keys keyboard, firmware version 12.1.13, and an MX Master 3 mouse, firmware version 19.1.15 (Somehow the mouse is not recognized when I run the firmware update tool. Tried several times on several occasions on two machines). Anyway, when I move from machine 1 to machine 2 using flow (keyboard is also linked with flow), the keyboard nicely back and forth. However, when I moved by flow to machine 2, and press the easy switch key on the keyboard to machine 1 again, I need to press it 3 times before the new machine is activated. The first 2 times it immediately switches back to machine 2.
-
Hi Arno,
Thanks for reaching out.
Could you kindly try updating the firmware using the link below. https://support.logi.com/hc/articles/360035037273
In case you need any additional support, please write back to us.
Regards,
Vasanth
Logi Support -
I went back to Options because the CTRL key did not satisfy me. I tend to use it when I play, or when I use certain applications and opening the application to activate or deactivate Flow is too restrictive. I hope to see the icon backin the task barre to simplify the use. Until then I will not use Options +
-
Settings not persisting?
In Options+, I defined settings for my MX Master 3 (wheel mode switch button assigned as middle key). This works initially.After some time, standby or hibernate, the mouse behaviour reverts back to default (“switch wheel mode”). If I open Options+, it shows the original setting as I stored it “middle key” but it’s not working as it is shown.
I have to change the setting for the button to something else and then back to “middle key”… then it works correctly for some time. Pretty annoying.
Setup: Options+ 1.10.9317 update from old Logitech Options, Windows 11 (with multiple local user accounts, not sure if that’s influencing it). Not using app-specific settings.
Anybody else exerpiencing this? What could be a fix? -
The website does now allow you to enter any information so that you can get download instructions. When you click Join Beta it gives you the following prompt on the webpage:
Enter the following details to receive the download instructions
Frustratingly, there is NO PLACE to enter anything. So it's impossible to join the beta. Please fix.
-
Hi J Fine,
Thank you for writing to us with your concern, we suggest you to uninstall the software from programs & Features on Windows computer. If Options does not work after uninstalling Options +, please do try clean uninstall.We also request you to try the steps from the link below, as flow works with Options + only when you login to the application.
https://support.logi.com/hc/articles/1500005634742
Regards,
Jyothi
Logi support -
Hi Cristian,
Thanks for following up on the case.
We hope you are referring to the Logi Options+ beta.
Please visit the software's web page to join the beta: https://www.logitech.com/software/logi-options-plus.html#join-beta.
However, Logi Options+ is not compatible with Windows 11.
Regards,
Prem L
Logi Support
Please sign in to leave a comment.
Comments
51 comments