- If your mouse is wireless, make sure it’s connected to your computer using the supplied USB cable or the wireless USB receiver.
- Open LGS and select your gaming mouse.
- Click the Surface Tuning icon.
- In the Surface Tuning window, click on one of the listed presets that matches your usage environment. If you’d like to create a custom surface tuning, click Add new surface.
NOTE: Factory Default is the default setting. Click Apply to restore the default settings.
- In the text box, enter a name for the custom surface tuning setting, and then press Enter.
NOTE: To remove the custom surface tuning setting, click the X next to the appropriate listing.
- Click Tune to start the custom surface tuning process.
- Place the mouse on the surface you intend to use, then press and hold the left mouse button.
- While holding the left mouse button, move the mouse continuously around the surface in a figure 8 pattern, covering the area you normally use.
NOTE: Watch the speedometer while tuning. Do not move the mouse too fast or slow.
- Release the left mouse button when the tuning process is complete.
NOTE: If the tuning process fails before completion, an error message will appear. If this happens, click Cancel and return to Step 6.
- Click Finish to return to the Surface Tuning window.
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section
There are no Downloads for this Product
There are no Downloads for this Version
Compatible Product
