Battery charge level
Battery charge level is displayed for two conditions:
- When the mouse is powered on (for seven seconds)
- While the mouse is powered off and connected to an active USB power source
NOTE: You can program a button to show charge level using Logitech Gaming Software (LGS).
The charge level LEDs light up to let you know the battery status:
- 3 green bars = 50-100% remaining charge
- 2 orange bars = 30-50% remaining charge
- 1 red bar = 15-30% remaining charge
- 1 flashing red bar = 15% or less — you should plug your mouse in to charge. For details, see Check battery status and charge the G900 or G903 gaming mouse.
DPI sensitivity level
Using LGS, you can customize up to five levels of DPI sensitivity, from 200 to 12000 DPI. Click the DPI Up and DPI Down buttons on your mouse to cycle through the DPI levels. The level indicators are shown below:
On-Board profile selection
The mouse has a total of five on-board memory profiles. Press the Profile Select button on the bottom of the mouse (below the On/Off switch) to cycle through on-board profiles. Each profile has a unique LED displayed on the top of the mouse (as shown).
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section
There are no Downloads for this Product
There are no Downloads for this Version
Compatible Product
