Rally will support either one 4k 30fps display (YCbCr 4:2:0) or two 1080p displays. In the case of two displays, HDMI 1 can support up to 1080p 60fps and HDMI 2 can support up to 1080p 30fps (which is then upscaled to 1080p 60fps).
Note: In Windows there are two locations where the display resolution needs to be checked or set. Please make sure the resolution is set to 1080p in both Display settings and Advanced Display Settings as follows:
-
Go to Settings and select System, then Display.
-
Make sure the resolution is set to 1920x1080
-
Click on Advanced Display Settings
-
Make sure the Active signal resolution is also set to 1920x1080.
-
If not, then click on Display adapter properties for Display
-
Click on List All Modes and select an appropriate 1920x1080 mode that has a refresh frequency which is supported by your display
-
The Active signal resolution should now show 1920x1080. If not try a different 1920x1080 mode under List All Modes.
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section
There are no Downloads for this Product
There are no Downloads for this Version
Compatible Product
