Before connecting your MX 5000:

1. Make sure your mouse is fully charged and the power switch on the underside of the mouse is set to ON.

2. Make sure you have fresh batteries in your keyboard and the power switch on the underside of the keyboard is set to ON.

3. Make sure the USB mini-receiver is directly and securely plugged into a working USB port on your computer.

4. Turn your computer on.

You can use Logitech’s Mouse and Keyboard software (SetPoint) to reconnect your MX 5000 keyboard and mouse.

NOTE: You may need a working mouse to open SetPoint and begin the connection process.

• Reconnecting your Bluetooth mouse
• Reconnecting your Bluetooth keyboard

Reconnecting your Bluetooth mouse

1. Open SetPoint (Start > Programs > Logitech > Mouse and Keyboard > Mouse and Keyboard Settings). If you do not have SetPoint installed you can download it on our MX 5000 Downloads Page.

2. Click the Tools tab located in the top right corner of the window.

3. Click the Bluetooth Resources icon in the side tab on the left.

4. Click on the Bluetooth Connection Assistant (BCA) Button.

   

5. Click on the mouse “Click here to connect” message.

   

6. Press and release the connect button on the mouse so it can be detected by the Bluetooth receiver as illustrated on the on-screen instructions.

   

7. Once the mouse is detected you will see a screen confirming the connection. Follow the on-screen instructions to verify the mouse is working properly.

   

8. After the Bluetooth Connection Assistant recognizes the connection to your mouse, a confirmation message will be displayed. Click Next to complete the connection process.

   

9. Your mouse connection should now be restored.

Reconnecting your Bluetooth keyboard

1. Open SetPoint (Start > Programs > Logitech > Mouse and Keyboard > Mouse and Keyboard Settings). If you do not have SetPoint installed you can download it on our MX 5000 Downloads Page.

2. Click the "Tools" tab located in the top right corner of the window.

3. Click the Bluetooth Resources icon in the side tab on the left.

4. Click on the Bluetooth Connection Assistant (BCA) Button.

   

5. Click on the keyboard “Click here to connect “message.

   

6. Press and release the Connect button on the keyboard so it can be detected by the Bluetooth receiver as illustrated on the on-screen instructions (shown in the image below).

   

7. Once the keyboard is detected you will see a screen confirming the connection. You will need to type in a Passkey given to you in this window. Follow the on-screen instructions to verify the keyboard is working properly.

   

8. When the Bluetooth Connection Assistant recognizes the passkey you will see a confirmation screen. Follow the on-screen instructions to complete this step.

   

9. After the Bluetooth Connection Assistant recognizes the connection to your keyboard a confirmation message will be displayed. Click Next to complete the connection process.

   

10. Your keyboard connection should now be restored