To set the alarms on the S400i clock radio dock, do the following:
-
Press and hold the Alarm 1 or the Alarm 2 button for 2 seconds until the hour light blinks.
-
Rotate the Control knob to select the hour, and then press the Control knob to set it. The minutes LED will begin to blink.
-
Rotate the Control knob to select the minutes, and then press the Control knob to set it. The source selection icon will begin to blink.
-
Rotate the Control knob to select the alarm source that you want to use (iPhone/iPod, FM, or Buzzer,) and then press the Control knob to set the source.
-
Once the alarm is set, you will see an alarm icon on the LCD that indicates the alarm is active. Alarm 1 is in the top left, and Alarm 2 is in the top right.
To deactivate an alarm, press the corresponding alarm button. The alarm indicator will turn off.
NOTE: If iPhone/iPod is selected as the source and no device is docked, the dock will default to the buzzer as the source.
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section
There are no Downloads for this Product
There are no Downloads for this Version
Compatible Product
