Connect the BLOK keyboard case to iPad Air 2

Before you connect your iPad Air 2 to the BLOK keyboard case, make sure it’s inserted correctly into the case.

To connect for the first time

If you’ve not done so already, remove the yellow tab protecting the battery.
To turn the keyboard on, push the power switch on the left side of the keyboard all the way to the right. You should see a green label next to the switch.
On first connection, your keyboard enters Bluetooth discovery mode and the status indicator will blink blue rapidly.
Go to the Bluetooth settings on your iPad and in the Devices list, select BLOK Keyboard Case.
If prompted for a code, type the code and then press return/enter.
NOTE: The code needs to be entered using the keyboard case and not the iPad’s on-screen keyboard.
Once the connection is made, the status indicator will turn solid blue. Your keyboard is ready to use.

To connect to a different iPad Air 2

If you’ve already connected your keyboard case to an iPad and want to connect it to another one:

Turn the keyboard on using the power switch on the left side of the keyboard case.
Press and hold the Bluetooth connection button on the right side of the keyboard until the status LED starts blinking rapidly blue. This will make your keyboard discoverable.
Go to the Bluetooth settings on your iPad and in the Devices list, select BLOK Keyboard Case.
If prompted for a code, type the code and then press return/enter.
NOTE: The code needs to be entered using the keyboard case and not the iPad’s on-screen keyboard.
Once the connection is made, the status indicator will turn solid blue. Your keyboard is ready to use.

Show All Downloads

Welcome to Logitech Support