Getting to know your Muse 

Pairing your Muse with Apple Vision Pro

1. Press and hold the top and primary button of the pen for 3 seconds until the pairing indicator starts blinking.
2. On your Apple Vision Pro, open Bluetooth settings and select Muse from the list of available devices to pair. 
3. When pairing is successful, you’ll feel a short haptic feedback, and the green LED will glow solid, confirming the connection.

Power Management 

Simply plug a USB-C cable into the USB-C port on the back of Muse. 

Note: USB-C cable is not included with Muse.

On and Off 

To power Muse ON: Press and hold the TOP button for 3 seconds. 

To power Muse OFF: Press and hold the TOP button for 3 seconds. 

To see battery status: Short Press power button. 

LED Indicator 

Every Muse stylus is equipped with an LED light at the front top to indicate power and connectivity status. A short press on power button should state the battery status. Green- Healthy, Red- Critical.

Replacing the Muse stylus tip 

Each Muse stylus comes with two replaceable tips in the box in addition to the tip already installed on the Muse. These tips can be found on the tray inside the box that holds Muse. 

Included are one additional fine tip and one wide tip. 

1. Firmly grasp the tip already installed into the Muse and pull out. 

2. Simply push in the replacement tip until you feel a light click as it locks into place.

Compatible Apps 

Muse is compatible with a number of apps and the list is continuing to grow.