Your Zone 950 headset is already paired to the receiver it ships with — just turn the headset on. The headset is successfully connected when the LED on the receiver turns solid white.
If your headset and receiver lose pairing or if you have a replacement Zone 950 receiver and need to re-pair, you can reconnect your headset using Logi Tune.
- Plug the USB-C receiver or USB-A adapter with the USB-C receiver into a USB port on your computer.
- Power on the headset by sliding the power switch to the center.
- Download and install Logi Tune and open it on your computer.
- Select Zone Receiver from the dashboard and wait while it looks for the previously connected headset.
- If no headset is shown as connected to the receiver, click Pair headset.
- Enter pairing mode on the headset by sliding the power switch to the Bluetooth icon and holding it for two seconds. The LED will flash blue rapidly.
- Once successfully paired, the LED on the receiver and on the headset will turn solid white.
Nota importante: lo strumento di aggiornamento del firmware non è più supportato o gestito da Logitech. Si consiglia vivamente di utilizzare Logi Options+ per i dispositivi Logitech supportati. Siamo qui per assisterti durante questa transizione.
Nota importante: Logitech Preference Manager non è più supportato o gestito da Logitech. Si consiglia vivamente di utilizzare Logi Options+ per i dispositivi Logitech supportati. Siamo qui per assisterti durante questa transizione.
Nota importante: Logitech Control Center non è più supportato o gestito da Logitech. Si consiglia vivamente di utilizzare Logi Options+ per i dispositivi Logitech supportati. Siamo qui per assisterti durante questa transizione.
Nota importante: l'utilità di connessione Logitech non è più supportata o gestita da Logitech. Si consiglia vivamente di utilizzare Logi Options+ per i dispositivi Logitech supportati. Siamo qui per assisterti durante questa transizione.
Nota importante: il software Unifying non è più supportato o gestito da Logitech. Si consiglia vivamente di utilizzare Logi Options+ per i dispositivi Logitech supportati. Siamo qui per assisterti durante questa transizione.
Nota importante: Il software SetPoint non è più supportato o gestito da Logitech. Si consiglia vivamente di utilizzare Logi Options+ per i dispositivi Logitech supportati. Siamo qui per assisterti durante questa transizione.
Domande frequenti
Non ci sono prodotti disponibili per questa sezione