Right out of the box, your Tarah earbuds come ready to pair. Here’s how:

1. Turn your Tarah earbuds on by holding the middle button until the LED blinks white and you hear the “Ready to pair. Download the Jaybird App for an assisted setup” voice prompt.
   
   
2. On your Bluetooth ® audio device go to the Bluetooth set up menu and find ‘Jaybird Tarah’ on the available devices list. On some audio devices, you may have to scan for available Bluetooth devices.
   
   
3. Select ‘Jaybird Tarah’ on the list to connect. Once connected, the white LED will turn off and you will hear the “Connected” voice prompt.

If you’re pairing your Tarah earbuds to another Bluetooth device, you’ll have to initiate pairing mode, as follows:

1. Turn your Tarah earbuds off by holding the middle button until the LED illuminates red and you hear a descending “Power off” tone.
   
   
2. Turn your Tarah earbuds on by holding the middle button until the LED blinks white and you hear the “Ready to pair. Download the Jaybird App for an assisted setup” voice prompt.
   
   
3. On your Bluetooth audio device go to the Bluetooth set up menu and find ‘Jaybird Tarah’ on the available devices list. On some audio devices, you may have to scan for available Bluetooth devices.
   
   
4. Select ‘Jaybird Tarah’ on the list to connect. Once connected, the white LED will turn off and you will hear the “Connected” voice prompt.