Sustainability Navigation

Introducing Options+: Upgrade your experience with the next-generation Logitech app for mice & keyboards

Đã ghim Nổi bật

Bình luận

62 bình luận

  • Rozi Jack

    How do you uninstall Options+?

    A warning should be given that Options+ Flow is not compatible with clients that are running Options (non-plus).  I do not have permission to install Options+ on my work computer, so I'm unable to use Flow between them now.

    If I try using Options after installing Options+, I can no longer control the devices as it "locks them out" so they require Options+.  Even if I uninstall Options+ (remove it from /Applications), that "Use Options+" lock still exists in Options.

    I tried but nothing is working right now. Even some apps are not working. It is blocking many URLs even my URL is marked as legit. 

    0
    Thao tác bình luận Đường dẫn cố định
  • Prem L

    Hey Rozi,

    We are sorry to know that. As informed earlier, for any issues/bug reports with Logitech Options+, please refer to the Feedback tab at the bottom of the app or you can send an email to us on logioptionsplus@logitech.com, your feedback will be directly received by the engineering team and they will look into it.

    Regards,
    Prem L
    Logi Support

    0
    Thao tác bình luận Đường dẫn cố định
  • Nilton Formis

    A nice addition to the Options+ is to add a capability to join the MX Keys Easy Switch buttons to the MX Master Not-so-Easy switch buttons, i.e., when I press the "1" switch on the MX Keys, it switch aldo to the "1" on the MX Master, or other designated position in the their positions.

     

    Yes! I need this!

    2
    Thao tác bình luận Đường dẫn cố định
  • Nilton Formis

    Another issue I found about the new Options+ is that the amount of movement needed to register the gestures is way too high, specially if compared to the previous Options. This alone makes me stick to the old software. Ideally this should be user configurable.

    0
    Thao tác bình luận Đường dẫn cố định
  • Prem L

    Hey Nilton,

    Thanks for adding your voice again in this thread. As the Logi Options+ is in the early phase of development, we may expect some uncomfortable situations. However, with your feedback, the team will work on the issue that our customers reported and release new versions with fixes. Hope you already shared the same feedback in the email.

    Regards,
    Prem L
    Logi Support

    0
    Thao tác bình luận Đường dẫn cố định
  • Grab The APK

    I wrote to you about changing the steering wheel, sent checks and everything that was required. They said they had sent the information for verification. 7 days have passed, maybe there are some results, how long should I wait? month?

    0
    Thao tác bình luận Đường dẫn cố định
  • Laurent Goussard

    I own a MX Anywhere 3.

    Yesterday, my Logi Options software prompt me to install Logi Options+. As a docile user, I did install this new software.

    Now I have two softwares, so I decide to remove the older and then I realized :

    Logi Options weighs 113Mo, which is amazingly overweighted for driving a mouse. My mail software weighs 4 times less ! My web browser weighs 8 times less ! 8 times less and does way much more things than defining actions on buttons…

    The madness then crossed a new stage: Logi Options+ weighs the triple. 390Mo.
    Logi, you may be kidding! 390Mo! That's insane!? Minecraft is smaller!
    You would say "Yeah, but you know, there is flow…" or “notifications and setting per app requires more files”… 390Mo, guys! Half a CD! 270 floppy drives for a mouse driver!

    You are crazy

    2
    Thao tác bình luận Đường dẫn cố định
  • Jason

    Hi,

     

    I recently bought a new Mouse lift vertical.

    so i trying to install logo options plus to custom buttons.

    through logitech opicial website i download install file and run it.

    but few seconds later it says "the internet connection isn't linked, Cannot download logi options plus. try it later ".

    so i tryed several times but it doesnt go further.....

    how can i use logi options plus??

     

    thanks

     

    0
    Thao tác bình luận Đường dẫn cố định
  • Sha S

    Hi Jason,
    Thank you for reaching out. We apologize for the delay in response. We request you to try the steps below and check if this helps your resolve the issue:
    1. Uninstall all the Logitech software
    2. If you are using windows clean boot the system by following the steps below:
    https://support.logi.com/hc/articles/360023183914
    3. Install Logitech Option+ software from the link below:
    https://support.logi.com/hc/articles/4418699283607-Logi-Options-Beta 
    Regards,
    Sha
    Logi Support

    0
    Thao tác bình luận Đường dẫn cố định
  • Arno Tolmeijer

    I'm using Logi Options+ version 0.92.6405 on two linked machines. I have an MX Keys keyboard, firmware version 12.1.13, and an MX Master 3  mouse, firmware version 19.1.15 (Somehow the mouse is not recognized when I run the firmware update tool. Tried several times on several occasions on two machines). Anyway, when I move from machine 1 to machine 2 using flow (keyboard is also linked with flow), the keyboard nicely back and forth. However, when I moved by flow to machine 2, and press the easy switch key on the keyboard to machine 1 again, I need to press it 3 times before the new machine is activated. The first 2 times it immediately switches back to machine 2.

    0
    Thao tác bình luận Đường dẫn cố định
  • VASANTH J

    Hi Arno,

    Thanks for reaching out. 

    Could you kindly try updating the firmware using the link below.  https://support.logi.com/hc/articles/360035037273

    In case you need any additional support, please write back to us.

    Regards,
    Vasanth
    Logi Support

    0
    Thao tác bình luận Đường dẫn cố định
  • James Benge

    With Logitech Options, there was checkbox under Flow to "Show taskbar icon".  This was a very quick and easy way to turn Flow On/Off as needed.  After "upgrading" to Logi Options+, it appears that this functionality has been removed -- is that correct?

    0
    Thao tác bình luận Đường dẫn cố định
  • Jean-Philippe MARQUE

    I went back to Options because the CTRL key did not satisfy me. I tend to use it when I play, or when I use certain applications and opening the application to activate or deactivate Flow is too restrictive. I hope to see the icon backin the task barre to simplify the use. Until then I will not use Options +

    0
    Thao tác bình luận Đường dẫn cố định
  • THE-MZ

    What about my $200 Craft keyboard?

    0
    Thao tác bình luận Đường dẫn cố định
  • Melanie Hoskin

    This has stopped working on latest Mac update - shows both laptops, but the mouse does not move onto the other laptop no matter what you do - even resetting it all doesn't work.

    0
    Thao tác bình luận Đường dẫn cố định
  • Eric9858

    Will there ever be a patch, or update that will let my G510 keyboard work with G-Hub?

    0
    Thao tác bình luận Đường dẫn cố định
  • VictorCuellar6818

    May I ask why the MacintoshHD/Users/Shared/LogiOptionsPlus/cache folder contains around 6.5 Gb that is just filling vital space in my already full-to-the-brim iMac M1?

    If I delete all that will it matter, and do I need to do that regularly?

    Also... why should I?

    0
    Thao tác bình luận Đường dẫn cố định
  • Ralf Neudel

    Settings not persisting?

    In Options+, I defined settings for my MX Master 3 (wheel mode switch button assigned as middle key). This works initially.

    After some time, standby or hibernate, the mouse behaviour reverts back to default (“switch wheel mode”). If I open Options+, it shows the original setting as I stored it “middle key” but it’s not working as it is shown.

    I have to change the setting for the button to something else and then back to “middle key”… then it works correctly for some time. Pretty annoying.


    Setup: Options+ 1.10.9317 update from old Logitech Options, Windows 11 (with multiple local user accounts, not sure if that’s influencing it). Not using app-specific settings.

    Anybody else exerpiencing this? What could be a fix?

    0
    Thao tác bình luận Đường dẫn cố định
  • Kai Desgranges

    When will be the installation issue with Windows 11 be resolved?
    Thank you in advance. 

    1
    Thao tác bình luận Đường dẫn cố định
  • Andy O

    Hello. The Logi Options+ has a huge memory leak on Macbook with Apple Silicon.

    Over 8GB of memory is consumed! The app si updated to latest version (1.11.1235)

    See attached screenshot.

    0
    Thao tác bình luận Đường dẫn cố định
  • THE-MZ

    Still no support for Craft keyboard ☹

    0
    Thao tác bình luận Đường dẫn cố định
  • mustafa okay
    I started using the beta software for mx master 3, however there was not "look up" function to assign for macs. The "look up" function is crucial, I will use the beta version when you add the look up function. I'm wondering is it included yet or not? or will you ever include that function?

     

    0
    Thao tác bình luận Đường dẫn cố định
  • imp3rator

    When you fix a memory leak bug ? Using from 1 to 8 GB memory is unacceptable.

    0
    Thao tác bình luận Đường dẫn cố định
  • Ekrem Duvarbaşı

    Hi,

    I have K850 keyboard. I am using it with Logi Options+ on both Windows and MacOS. My keyboard has ISO layout. But on MacOS it becomes to seen as ANSII layout. I always have to reconnect my keyboard to solve this issue.

    Notes
    - My built-in Macbook keyboard has ANSII layout.
    - Not sure but, It usually happens on macbook startup.

    0
    Thao tác bình luận Đường dẫn cố định
  • Arne Franken

    there is no list of supported devices on the Logi Options+ product page https://support.logi.com/hc/en-us/articles/4418699283607

    how am I supposed to know if my devices are already supported or not? "Just install and see what happens"?

    0
    Thao tác bình luận Đường dẫn cố định
  • l1TTss

    I have already downloaded options+ version 1.26.5989, the installation instructions cannot be downloaded and cannot be installed.

    Your software system does not have a redundant structure for backup, and you need to crash the entire software system for upgrade and maintenance. You are a famous company, and you are doing such crap in this regard! An upgrade maintenance takes several days to restore the software system.

    Fuck you Logitech!

    0
    Thao tác bình luận Đường dẫn cố định
  • Elmar Pestel

    Did anyone read the privacy statement of Logitech Options?

    Here is the German version:

    Nutzungsdaten – Daten darüber, wie Sie und Ihr Gerät mit uns und unseren Produkten interagieren, z. B.:

    • Produktnutzungsdaten – Die von Ihnen verwendeten Funktionen und die Aktionen und Aktivitäten, die Sie ausführen, z. B. gedrückte Tasten, Interaktionen mit einer App oder die Zeit, während derer Sie Audio aus einem Lautsprecher hören.
    • Gerätedaten – Daten über Ihr Gerät und das Netzwerk, über das Sie eine Verbindung zu unseren Produkten herstellen, einschließlich der Betriebssysteme und anderer Software auf Ihren Geräten, Geräte-IDs sowie Regions- und Spracheinstellungen.

     

    THIS IST UNACCEPTABLE !!! Your are really collecting the pressed keys, interactions with the app with timestamp, my network etc etc

    If this is true, this is a piece of malware and not a software!!!

    Please comment on that

    Thanks

     

    1
    Thao tác bình luận Đường dẫn cố định
  • Atkins Fleming

    Please please please add support for the Craft keyboard to Options+!!  I don't understand why your most advanced, most expensive keyboard is so far down the list on your flagship software, but I haven't been able to use Flow for months now and it's driving me crazy!  I now regret buying the Craft and wish I just had the MX Keys, which has been supported from the beginning.  PLEASE!

    For more context, I also use the M720 mouse which was immediately supported by Options+.  It was a forced upgrade, so Flow works for the mouse but not for the keyboard which is still on the old Options software.  Very annoying.  Thanks.

    0
    Thao tác bình luận Đường dẫn cố định
  • VASANTH J

    Hi Atkins, 

    Thanks for reaching out.

    Thank you for your feedback. We will pass this along to our team. We request you to subscribe to Logitech newsletter in-order to receive the updates. We always want to ensure we are providing our customers with the best products and experience. Let us know if there is anything else in the future we can do to assist.

    Regards,
    Vasanth
    Logi Support.

    0
    Thao tác bình luận Đường dẫn cố định
  • VGL

    MX Master 3

    SmartShift in the program is often turned off.

    A different task is assigned to the mouse button.

    Fix it!

    0
    Thao tác bình luận Đường dẫn cố định

Vui lòng đăng nhập để lại bình luận.