Sustainability Navigation

MK540 Mouse isn't working

Đã trả lời

Bình luận

1 bình luận

  • Bình luận chính thức
    Aravind

    Hi Sheila,

    Thank you for reaching out. We request you to try the below-mentioned steps and check if this helps you to resolve the issue:
    1. Verify the product or receiver is not connected to a hub, extender, switch or something similar.
    2. Move the device closer to the USB receiver. If your receiver is in the back of your computer, it may help to relocate the receiver to a front port. In some cases the receiver signal gets blocked by the computer case, causing a delay.
    3. Keep other electrical wireless devices away from the USB receiver to avoid interference.
    4. Unpair/repair or disconnect/reconnect hardware:
    5. If you have a Unifying receiver, identified by this logo, see Unpair a mouse or keyboard from the Unifying receiver.
    6. If your receiver is non-Unifying, it cannot be unpaired. However, if you have a replacement receiver, you can use the Connection Utility software to perform the pairing.
    7. Update the firmware for your device if available.
    8. Windows only ? check if there are any Windows updates running in the background that may cause the delay.
    9. Mac only ? check if there are any background updates that may cause the delay.
    10. Try on a different computer.

    In case you need any additional support, please write back to us.

    Regards,
    Aravind
    Logi Support

    Thao tác bình luận Đường dẫn cố định

Vui lòng đăng nhập để lại bình luận.