If your device becomes unpaired or you receive a replacement LIGHTSPEED wireless adapter, do the following to pair your device:

1. Turn your headset ON in LIGHTSPEED mode.

   

2. Plug the LIGHTSPEED receiver into the host device. (If it’s already plugged in, un-plug and then plug it back in.)

   

3. Remove the left earpad cushion.

   

4. Use a paperclip to long press the headset pairing button. The headset will blink and chime.

5. Use a paperclip to press the LIGHTSPEED receiver pairing button. The light on the adapter will blink.

   

6. Wait 10-15 seconds for pairing to complete. Blinking will stop on both the headset and adapter and you'll hear a chime in the headset to indicate pairing is complete.