Your MEGABOOM can sometimes get into a state where it doesn’t charge. To get your MEGABOOM back to a normal charging state, do the following:
- Connect your speaker to the charger and leave it connected for a few seconds.
- If the charge LED fails to pulse continuously, disconnect the cable from your speaker, then reconnect it, and leave it connected for a few seconds.
- Repeat steps 1 and 2 until your speaker gets to a normal charge cycle - the LED should continue to pulse. (This could take up to 25-30 times.)
- Once your speaker gets to a point where it charges normally, continue to charge it until the battery is at 100%.
Be sure to update the firmware on the speaker so that the issue does not re-occur. To update your MEGABOOM software:
- Download the latest app for your speaker.
- Connect your speaker to your smartphone and open the app.
- Tap More, then tap the update prompt.
重要提示：罗技不再对固件更新工具提供支持或维护。强烈推荐您将 Logi Options+ 用于受支持的罗技设备。在此过渡期间，我们将为您提供帮助。
重要提示：罗技不再对 Logitech Preference Manager 提供支持或维护。强烈推荐您将 Logi Options+ 用于受支持的罗技设备。在此过渡期间，我们将为您提供帮助。
重要提示：罗技不再对 Logitech Control Center 提供支持或维护。强烈推荐您将 Logi Options+ 用于受支持的罗技设备。在此过渡期间，我们将为您提供帮助。
重要提示：罗技不再对 Logitech Connection Utility 提供支持或维护。强烈推荐您将 Logi Options+ 用于受支持的罗技设备。在此过渡期间，我们将为您提供帮助。
重要提示：罗技不再对 Unifying 软件提供支持或维护。强烈推荐您将 Logi Options+ 用于受支持的罗技设备。在此过渡期间，我们将为您提供帮助。
重要提示：罗技不再支持或维护 SetPoint 软件。强烈推荐您将 Logi Options+ 用于受支持的罗技设备。在此过渡期间，我们将为您提供帮助。
常问问题
此部分没有可用的产品
没有此产品的相关下载内容
没有此版本的相关下载内容。
Compatible Product
