Sustainability Navigation

Yeti X unusable on macOS Big Sur on Apple Silicon / M1

已回答

评论

86 条评论

  • Adam Bellas

    Confirmed: latest Logitech G Hub update seems to correct issue. Wow, they finally did it.

    Thank you, Luan Devecchi, for posting. I immediately updated to G Hub version 2021.8.792 and then opened Adobe Audition and made a recording. Initially, things look good. I've got more things to try, but it's looking good so far.

    To confirm: my Yeti X appears to be working properly on my MacMini running Big Sur on Apple Silicon now via Logitech G Hub version 2021.8.792.

    1
    评论操作 固定链接
  • Sean Hamstra

    I can confirm it finally works as well! Even the noise cancellation. (Blue VO!CE)

    Mac mini M1 with the Yeti Nano, GHUB version 2021.8.792

    1
    评论操作 固定链接
  • Robert Mohns

    Still busted on Big Sur on Intel Mac. Takes about 10 minutes for the buzzing to start, vs less than a minute before. Something's still amiss. Glad it's fixed for M1 users though! :D

    1
    评论操作 固定链接
  • Philippe Chiu

    Issue is still present on my Macbook Air M1, takes just a bit more time to happen.. Uninstalled Ghub once again..

    1
    评论操作 固定链接
  • Eric Lubbers

    Confirming that the issue is still present on m1 MacBook with Yeti X. Like others have said, it works great during testing and for the first 10 minutes or so of any recording/video conference, then starts buzzing and clipping like before.

    1
    评论操作 固定链接
  • ISH

    Hi Guys 

    I am getting Driver Blocked error with Logitech G Hub, can you advice on how to get that unblocked I have a Mac Mini M1. Thank You!

    1
    评论操作 固定链接
  • Vida Bennett

    I have discovered that if I simply shut the lid on my macbook, then plug in my Yeti, then open the lid again, the mic works.

    I have nowhere near enough tech knowledge to be able to do some of the work arounds mentioned here, so I'm grateful for this very simple fix.

     

    1
    评论操作 固定链接
  • Armin Cano

    MacBook Pro (13-inch, M1, 2020)

    macOS Big Sur Version 11.6

    Yeti X

    Logitech G HUB Version 2021.9.7463

     

    I'm also experiencing input delay issue as well.

    I uninstalled G HUB and restarted the mac but the delay continue. Tested the mic with an intel macbook air with usb a port and there is no delay.

    Maybe it happens because i'm using a generic usb a to usb c adapter... would an apple adapter solve the issue?

     

    1
    评论操作 固定链接
  • Frenchie

    To solve my delay issue and successfully use the Yeti (Not Yeti X, or Yeti Nano) on my M1 MBP I had to disable SIP and remove the KEXT for Logitech. Hope this helps!

    1
    评论操作 固定链接
  • ErikHope2958

    Thank you, Tom and Carlo Zayne. Your workaround has solved my issue. I'm sad that I don't get to use the filters but happy I'm not rebooting every hour. I will not hold my breath that Logitech will ever fix these issues. These issues are a case of great hardware with lousy software. I suspect this is a company merger issue when it comes down to it.

    1
    评论操作 固定链接
  • Jean-Baptiste Kechi

    Same issue here. I need to have my blue Yeti X plugged on start up to make it work correctly.

    They made me buy a micro usb > usb cable after buying and USB A to USB C which I thought was faulty. Only to discover that it is an incompatibility with the M1 chip.

    The crazy thing is that the mic is detected properly so I had to figure out the hard way that the mic wasn't working properly...

    1
    评论操作 固定链接
  • macondo1974

    I have the Yeti X and since I bought my Macbook Pro M1 I can't use it. It connects for brief moments and then stops working. In G Hub (updated to version 2022.2.9146) it appears as "connecting", but nothing happens. I have sent multiple requests to Logitech without getting a single satisfactory response.

     Do you know of any solutions? Or should I sell the microphone and buy one that supports mac M1s?

    1
    评论操作 固定链接
  • George Jarrett

    macondo1974: I have been using the Yeti Nano with my M1 Macbook for a year. As described above, the work-around is to not use the G Hub software, and (this is very important) delete Logitech's driver, because that is the source of the problem.

    As Carlo Zayne says above, these two terminal commands should do it:

        sudo rm -rf /Library/Extensions/logi_audio_override.kext
        sudo rm -rf /Library/Audio/Plug-Ins/HAL/LogiGamingAudio.*

    Then reboot.

    Some people report that it works best to leave the mic plugged in when you reboot, but on my system I can plug the mic in only when needed. You should be able to select the mic in the MacOS System Preferences when it is plugged in. I use it primarily in Zoom and OSB, and the mic shows up reliably for me in both of those applications.

    1
    评论操作 固定链接
  • ddoubled

    MB pro 13 inch, M1, 2020 running Monterey, V12.3

    the mic is working fine but software will not see it or control it.

    Ghub wont see the mic.

    Using the following logitech products

    MX master m2 mouse, C930e camera,  Blue yeti X warcraft ed.

    I Have tried re-installing the software.  rebooted multiple times,  system software uses the mic just fine and all the pgysical controlls work.

    Let me know if there is a confirmed and consistent fix on this.  I would like to use the software but its not a big deal for me if it does not work.  

    1
    评论操作 固定链接
  • Tim Davey

    George Jarrett your solution worked! Running the uninstall script alone didn't do it for me. So I had to manually move (as it's safer than removing) the extension file. Via below then restarting the machine.

    cd /Library/Extensions/; sudo mv logi_audio_override.kext backup_logi_audio_override.kext;

    I still can't use the software but at least I can now use the mic. Thank you!

    0
    评论操作 固定链接
  • Sean Hamstra

    Same exact issue with Mac M1 and Yeti Nano. For me it "works" as a basic mic if I restart with it plugged in. If you unplug and plug back in OR start sherpa it reverts to the terrible echoing, unusable audio. Please fix and at least provide an update asap!

    0
    评论操作 固定链接
  • Philippe Chiu

    Just installed Logitech GHUB 2021.6.4851 and the issue is still there, more annoying than ever, given the  fact that Logitech is still not providing a solution while it has been clearly identified it's bound to its software (kernel extension) with M1 chips.

    0
    评论操作 固定链接
  • David Clement

    Anyone know if this has been resolved?

    0
    评论操作 固定链接
  • Robert Mohns

    @Griffdb Return it while you still can. Logitech hasn’t fixed this in nearly a year, I don’t think they care.

    0
    评论操作 固定链接
  • Adam Bellas

    I agree with Robert Mohns, griffdb - return it. I'm well past the date for my YetiX. I'm a well rounded software and hardware professional in the IT industry, for decades, and I can't get this thing working on my M1 Big Sur MacMini. Logitech and Blue (same thing I guess) aren't giving us anything, not for months.

    Return it. Even if they come out with a fix tomorrow, they've lost my trust as a vendor in every way. The damage is irreparable. 

    0
    评论操作 固定链接
  • Guillaume CAUCHOIS

    Here we are !

    It works perfectly. Thank you for fixing the problem (finally) 

    Macbook PRO M1 + Yeti X 

    0
    评论操作 固定链接
  • Sneha D

    Hi Greg,

    Thanks for reaching out and we apologize for the inconvenience.

    Could you kindly confirm the device model name to help you accordingly.

    Regards,

    Sneha D

    Logi G Support.

    0
    评论操作 固定链接
  • JerryInNYC

    Oh boy. A few weeks ago, after three decades trapped in the PC world, I switched to Mac via a new M1 MacBook Air so I could use Camtasia and a Blue Yeti to create screen-recording tutorials. After weeks of thinking the problem must be my ignorance about the M1 Air, Camtasia, and the Blue Yeti, at least now I know it's not. 

    Does this mean that Tim Cook runs an even worse horror show than Bill Gates did? 

    -1
    评论操作 固定链接
  • Robert Mohns

    Having similar problems with buzzing audio with the Yeti X on Big Sur on a 2016 MacBook Pro i7. Whatever the issue is, it's not just Apple Silicon. It's with Logitech G Hub itself.

    -1
    评论操作 固定链接
  • Sneha D

    Hi there, thanks for reaching out. We'd love to keep the conversation going directly with the Support Team. So, we will now go ahead and create a ticket for you and the team will review your case and will be in touch via email as soon as possible. Do not hesitate to let us know if you have any questions as the team follows up or in the meantime as the conversation continues there.

    Regards,
    Sneha D
    Logi G Support.

    -1
    评论操作 固定链接
  • Ahmed A

    Hey there,

    We're so glad we were able to help! Let us know if you have any questions or concerns any time in the future.

    Regards,
    Ahmed A
    Logi G Support

    -2
    评论操作 固定链接

请先登录再写评论。