You can connect your devices to the Z407 speakers in three different ways. You can use:
NOTE: When you turn the speakers on, they will default to the last connection used. To switch between devices, use the wired input button and the Bluetooth button on the bottom of the dial.
- On the source device, make sure Bluetooth is turned on.
- Turn the Z407 speakers on.
- On the bottom of the control dial, press and hold the Bluetooth button for two seconds to activate pairing mode. The status indicator will blink quickly.
- In your source device’s Bluetooth menu, locate and select Logi Z407 from the device list to complete the connection.
Your source device should now be paired and connected to your Z407 speakers. You can pair up to eight Bluetooth source devices with your speakers and connect to two of them at once.
- Connect your device to the speakers using the USB cable.
NOTE: The cable is not provided and should be purchased separately. - Turn the speakers on.
- Make sure that the LED indicator lights up in white. If it doesn’t, press the wired input button to switch.
- Connect your device to the speakers using a 3.5mm auxiliary cable (3-pole, male to male).
- Turn the speakers on.
- Make sure that the LED indicator lights up in purple. If it doesn’t, press the wired input button to switch.
重要須知:韌體更新工具不再由 Logitech 支援或維護。我們強烈建議為支援的 Logitech 裝置使用 Logi Options+。在此過渡期間,我們會隨時為您提供協助。
重要須知:Logitech Preference Manager 已不再由 Logitech 支援或維護。我們強烈建議為支援的 Logitech 裝置使用 Logi Options+。在此過渡期間,我們會隨時為您提供協助。
重要須知:Logitech Control Center 已不再由 Logitech 支援或維護。我們強烈建議為支援的 Logitech 裝置使用 Logi Options+。在此過渡期間,我們會隨時為您提供協助。
重要須知:Logitech Connection Utility 已不再由 Logitech 支援或維護。我們強烈建議為支援的 Logitech 裝置使用 Logi Options+。在此過渡期間,我們會隨時為您提供協助。
重要須知:Unifying Software 已不再由 Logitech 支援或維護。我們強烈建議為支援的 Logitech 裝置使用 Logi Options+。在此過渡期間,我們會隨時為您提供協助。
重要須知:羅技不再支援或維護 SetPoint 軟體。我們強烈建議為支援的 Logitech 裝置使用 Logi Options+。在此過渡期間,我們會隨時為您提供協助。
常見問答集
沒有適用於此區段的產品