Introducing Options+: Upgrade your experience with the next-generation Logitech app for mice & keyboards
釘選的 成為精選的
Logitech Options+ app, available today in an open beta for Windows 10, macOS 10.15 and 11 , is designed to help you create and communicate more efficiently than ever using Logitech's mice and keyboards. With Options+ you can work at your best, no matter the task or the app, and be at your most productive by customizing every aspect of your devices to suit your needs, workflows, and preferences.
https://www.youtube.com/watch?v=s5POJvwK8nc
The app combines the best of the current Options software with a newly redesigned, intuitive interface, that helps maximize your productivity in a next-generation, free-to-use, app.
Learn more here.
We invite you to join the beta for Options+ here with your supported Logitech device, and share your feedback using the button provided in the app. Your input is very important during the beta phase, allowing us to continually make improvements and deliver the best experience possible. We look forward to hearing from you!
Thanks,
Options+ team
-
How do you uninstall Options+?
A warning should be given that Options+ Flow is not compatible with clients that are running Options (non-plus). I do not have permission to install Options+ on my work computer, so I'm unable to use Flow between them now.
If I try using Options after installing Options+, I can no longer control the devices as it "locks them out" so they require Options+. Even if I uninstall Options+ (remove it from /Applications), that "Use Options+" lock still exists in Options.
I tried but nothing is working right now. Even some apps are not working. It is blocking many URLs even my URL is marked as legit.
-
Hey Rozi,
We are sorry to know that. As informed earlier, for any issues/bug reports with Logitech Options+, please refer to the Feedback tab at the bottom of the app or you can send an email to us on logioptionsplus@logitech.com, your feedback will be directly received by the engineering team and they will look into it.
Regards,
Prem L
Logi Support -
A nice addition to the Options+ is to add a capability to join the MX Keys Easy Switch buttons to the MX Master Not-so-Easy switch buttons, i.e., when I press the "1" switch on the MX Keys, it switch aldo to the "1" on the MX Master, or other designated position in the their positions.
Yes! I need this!
-
Hey Nilton,
Thanks for adding your voice again in this thread. As the Logi Options+ is in the early phase of development, we may expect some uncomfortable situations. However, with your feedback, the team will work on the issue that our customers reported and release new versions with fixes. Hope you already shared the same feedback in the email.
Regards,
Prem L
Logi Support -
I own a MX Anywhere 3.
Yesterday, my Logi Options software prompt me to install Logi Options+. As a docile user, I did install this new software.
Now I have two softwares, so I decide to remove the older and then I realized :
Logi Options weighs 113Mo, which is amazingly overweighted for driving a mouse. My mail software weighs 4 times less ! My web browser weighs 8 times less ! 8 times less and does way much more things than defining actions on buttons…
The madness then crossed a new stage: Logi Options+ weighs the triple. 390Mo.
Logi, you may be kidding! 390Mo! That's insane!? Minecraft is smaller!
You would say "Yeah, but you know, there is flow…" or “notifications and setting per app requires more files”… 390Mo, guys! Half a CD! 270 floppy drives for a mouse driver!You are crazy
-
Hi,
I recently bought a new Mouse lift vertical.
so i trying to install logo options plus to custom buttons.
through logitech opicial website i download install file and run it.
but few seconds later it says "the internet connection isn't linked, Cannot download logi options plus. try it later ".
so i tryed several times but it doesnt go further.....
how can i use logi options plus??
thanks
-
Hi Jason,
Thank you for reaching out. We apologize for the delay in response. We request you to try the steps below and check if this helps your resolve the issue:
1. Uninstall all the Logitech software
2. If you are using windows clean boot the system by following the steps below:
https://support.logi.com/hc/articles/360023183914
3. Install Logitech Option+ software from the link below:
https://support.logi.com/hc/articles/4418699283607-Logi-Options-Beta
Regards,
Sha
Logi Support -
I'm using Logi Options+ version 0.92.6405 on two linked machines. I have an MX Keys keyboard, firmware version 12.1.13, and an MX Master 3 mouse, firmware version 19.1.15 (Somehow the mouse is not recognized when I run the firmware update tool. Tried several times on several occasions on two machines). Anyway, when I move from machine 1 to machine 2 using flow (keyboard is also linked with flow), the keyboard nicely back and forth. However, when I moved by flow to machine 2, and press the easy switch key on the keyboard to machine 1 again, I need to press it 3 times before the new machine is activated. The first 2 times it immediately switches back to machine 2.
-
Hi Arno,
Thanks for reaching out.
Could you kindly try updating the firmware using the link below. https://support.logi.com/hc/articles/360035037273
In case you need any additional support, please write back to us.
Regards,
Vasanth
Logi Support -
I went back to Options because the CTRL key did not satisfy me. I tend to use it when I play, or when I use certain applications and opening the application to activate or deactivate Flow is too restrictive. I hope to see the icon backin the task barre to simplify the use. Until then I will not use Options +
-
Settings not persisting?
In Options+, I defined settings for my MX Master 3 (wheel mode switch button assigned as middle key). This works initially.After some time, standby or hibernate, the mouse behaviour reverts back to default (“switch wheel mode”). If I open Options+, it shows the original setting as I stored it “middle key” but it’s not working as it is shown.
I have to change the setting for the button to something else and then back to “middle key”… then it works correctly for some time. Pretty annoying.
Setup: Options+ 1.10.9317 update from old Logitech Options, Windows 11 (with multiple local user accounts, not sure if that’s influencing it). Not using app-specific settings.
Anybody else exerpiencing this? What could be a fix? -
Hi,
I have K850 keyboard. I am using it with Logi Options+ on both Windows and MacOS. My keyboard has ISO layout. But on MacOS it becomes to seen as ANSII layout. I always have to reconnect my keyboard to solve this issue.
Notes
- My built-in Macbook keyboard has ANSII layout.
- Not sure but, It usually happens on macbook startup. -
there is no list of supported devices on the Logi Options+ product page https://support.logi.com/hc/en-us/articles/4418699283607
how am I supposed to know if my devices are already supported or not? "Just install and see what happens"?
-
I have already downloaded options+ version 1.26.5989, the installation instructions cannot be downloaded and cannot be installed.
Your software system does not have a redundant structure for backup, and you need to crash the entire software system for upgrade and maintenance. You are a famous company, and you are doing such crap in this regard! An upgrade maintenance takes several days to restore the software system.
Fuck you Logitech!
-
Did anyone read the privacy statement of Logitech Options?
Here is the German version:
Nutzungsdaten – Daten darüber, wie Sie und Ihr Gerät mit uns und unseren Produkten interagieren, z. B.:
- Produktnutzungsdaten – Die von Ihnen verwendeten Funktionen und die Aktionen und Aktivitäten, die Sie ausführen, z. B. gedrückte Tasten, Interaktionen mit einer App oder die Zeit, während derer Sie Audio aus einem Lautsprecher hören.
- Gerätedaten – Daten über Ihr Gerät und das Netzwerk, über das Sie eine Verbindung zu unseren Produkten herstellen, einschließlich der Betriebssysteme und anderer Software auf Ihren Geräten, Geräte-IDs sowie Regions- und Spracheinstellungen.
THIS IST UNACCEPTABLE !!! Your are really collecting the pressed keys, interactions with the app with timestamp, my network etc etc
If this is true, this is a piece of malware and not a software!!!
Please comment on that
Thanks
-
Please please please add support for the Craft keyboard to Options+!! I don't understand why your most advanced, most expensive keyboard is so far down the list on your flagship software, but I haven't been able to use Flow for months now and it's driving me crazy! I now regret buying the Craft and wish I just had the MX Keys, which has been supported from the beginning. PLEASE!
For more context, I also use the M720 mouse which was immediately supported by Options+. It was a forced upgrade, so Flow works for the mouse but not for the keyboard which is still on the old Options software. Very annoying. Thanks.
-
Hi Atkins,
Thanks for reaching out.
Thank you for your feedback. We will pass this along to our team. We request you to subscribe to Logitech newsletter in-order to receive the updates. We always want to ensure we are providing our customers with the best products and experience. Let us know if there is anything else in the future we can do to assist.
Regards,
Vasanth
Logi Support.
請登入寫評論。
評論
71 條評論