| Stage | LED Status | Description |
| Setup/Bootup | Solid Yellow | Starting bootup Note: If it does not progress past this state permanently it means that the boot-up has failed. |
|---|---|---|
| Breathing Yellow | Bootup in progress Note: If it does not progress past this state permanently it means that the boot-up has failed. |
|
| Rapid Blinking Yellow | Known Error - The hardware is unable to boot Contact Support for troubleshooting |
|
| Rapid Blinking White |
Insufficient power in the doorbell wiring system to run the system. You will need to do one or all of the following steps to ensure that the system runs properly.
|
|
| Double Blink White (Repeating for 2 minutes) |
Insufficient power in the doorbell wiring system to operate optimally. The system may operate but it is susceptible to shutting down in certain conditions.
|
|
| Solid Green | Ready for - setup/re-pair/Wi-Fi change | |
| Breathing Green | Connecting to wireless network | |
| Fast Blinking Green |
Error - Connection time out / connection to a paired wireless network is failing
|
|
| Usage | Solid Dark Blue | Allow streaming |
| Solid Red | Stream and allow recording | |
| Breathing Red | Watching Live | |
| Breathing Light Blue/Cyan | Firmware downloading / updating | |
| Breathing White | Firmware Updating - MCU | |
| Rapid Blinking Red | Thermal Control Mechanism in progress. Learn more here. |
|
| Other | Rapid Blinking Dark Blue | Error - Locked Device If you notice this, your device has previously been reported stolen and has been locked. |
| Led Black / Off | No Power or Status LED disabled |
| Stage | LED Status | Description |
| Setup/Bootup | LED Off | Chime Kit is not powered up and the input is not connected correctly. |
|---|---|---|
| Solid Green Dim | Chime Kit is connected to power correctly and is charging up. NOTE: The product may be in this state for a few minutes after first connecting. |
|
| Solid Green Bright | Chime Kit is connected to power correctly and is ready to ring. | |
| Usage | Solid Blue | The Chime Kit is powered up and trying to ring the indoor chime. If you don’t hear a ring try the troubleshooting steps here. For analog chimes, the blue led may just be a single blink as the ring duration is pretty short. For a digital chime, we can support chimes with melodies up to 15 seconds. NOTE: During this time the LED will stay on solid blue even if the melody is shorter and the next ring will occur after 15 seconds. |
| Double Blink Blue |
The Chime Kit is powered up but is unable to ring the indoor chime:
|
Frequently Asked Questions
There are no products available for this section
There are no Downloads for this Product
There are no Downloads for this Version.
Show All Downloads
Compatible Product
