Before you use your Spotlight 2 remote for the first time:

1. Remove the pull tab inserted next to Logi Bolt receiver. 
   The LED will start blinking white rapidly, indicating pairing mode.
   NOTE: If the LED isn’t blinking, connect a USB-C charging cable to the Spotlight 2 charging port and charge it for a minute. Then continue with manual pairing as described below or see Connect Spotlight 2 to a device using the USB receiver or Bluetooth.
2. Choose how you want to connect:
   • Use the included Logi Bolt wireless receiver:
     Plug the receiver into a USB-C port on your computer. Press any button on the remote to power it on, and wait a moment while it automatically connects. When the connection is complete, the white LED will turn off.
   • Connect directly using Bluetooth:
     Go to Bluetooth settings on your device and select Spotlight 2 in the list of discovered devices. Once connected, the white LED will turn off.
     NOTE: To enter pairing mode again, press and hold the Back and Next buttons simultaneously for three seconds until the LED blinks rapidly.
     Click here for more details on how to connect your Logitech Bluetooth device on your computer. If you experience issues with Bluetooth, click here for Bluetooth troubleshooting.
3. Install Logi Options+ Software.
   Download Logi Options+ to use all the possibilities this presenter has to offer. Click here to download and learn more about Logi Options+.
   NOTE: Spotlight 2 is always on and automatically goes to sleep after 30 minutes of inactivity to save battery. Simply press any button to wake it up.